TERATONE 467
TERATONE 467 is a color enhancing, deep penetrating, solvent based acrylic sealer. TERATONE will enhance the natural colors of stone, while forming a durable, stain resistant barrier across the surface. TERATONE 467 is very effective outdoors, protecting surfaces from UV rays and weathering.
Surfaces treated with TERATONE will have their colors enhanced with a satin finish. TERATONE is very effective in refreshing the appearance of old and faded stone surfaces. TERATONE dries slower than the average sealer, allowing it to penetrate deeply and effectively before setting.
TERATONE is very effective at sealing and protecting dense or smooth surfaces such as quarry tile, unglazed ceramic tile, slate, unfinished marble, terrazzo, travertine, smooth cement, shell stone, limestone, and all other cementitious materials. Also suitable for brick, brick pavers, concrete pavers, and exposed aggregate. For interior or exterior use.
SHOP TERATONE 467
SURFACES WHERE TERATONE 467 EXCELS:
High Traffic Areas: TERATONE 467 provides a tough and durable barrier to protect high traffic areas from dirt, spills, and stains.
Very Porous Surfaces: Porous surfaces absorb stains very easily. TERATONE 467’s protective coating inhibits absorption by porous material.
Outdoor Surfaces: TERATONE 467 excels against the constant threats faced by outdoor surfaces. TERATONE 467 protects from the effects of weathering, rain, and UV damage.
SURFACE PREPARATION:
Always be sure the surface is clean, dry, and free from any dirt, grease, oil, wax, or other contaminants. Read the entire label before using. Use only as directed. Always test on a small piece of material or a small inconspicuous area to determine suitability. Ensure the area is well ventilated. Ideal surface temperature should be between 60°F and 80°F. Product works best when it is the first substance applied to the surface, insuring proper penetration.
COVERAGE:
For very porous surfaces: 1st coat: 150-200 sq. ft./gallon. 2nd coat 300-400 sq. ft./gallon.
For average density surfaces: 1st coat: 250-300 sq. ft./gallon. 2nd coat 400+ sq. ft./gallon.
For very dense surfaces: 1000 sq. ft./gallon.
APPLICATION:
For best results, apply TERATONE 467 with a short nap paint roller(1/4”- 1/2”). Spread in thin coats, evenly and uniformly, leaving no puddles. Allow 8-24 hours to dry before adding a second coat. May also be applied with spray applicator, natural fiber paint brush, roller, or lint free rag.
CLEANUP
Xylene or similar solvent can be used to clean tools.
STORAGE AND HANDLING
CAUTION: Highly flammable & combustible liquid and vapor. Do not handle until all safety precautions have been read and understood. Handling: Do not get in eyes, on skin, or on clothing. Do not breathe vapors or mists. Keep container closed and tightly sealed when not in use. Keep away from sources of ignition - No smoking. Take measures to prevent the buildup of electrostatic charge. Conditions for safe storage: Keep in tightly closed, properly labeled containers. Keep in a cool, well-ventilated place. Materials to avoid: Do not store with the following product types: Strong oxidizing agents, Explosives, Gases.
TECHNICAL SUPPORT
Technical Support is available by calling (813) 876-5914
Emergency Support: ChemTel: 1 (800) 255-3924
BY MAIL: Catalina Chemical Co. 4709 N. Lois Ave. Tampa, FL 33614
TRANSPORTATION
UN number: UN1139
UN proper shipping name: Coating Solution
Transport hazard class: 3
Packing group: 3
PACKAGING
Available in: 1 quart, 1 gallon, 5 gallon, or 55 gallon drum quantities
